L_SYSTEM_V1.04_R00_260730.zip V1.04 R00 System Update File 

This software is for Barudan "L" series machines. Specific model numbers include:

• BELY-S1502CII
• BELY-S1504CII
• BELY-S1506CII
• BELY-S1508CII
• BELS-S1512C
• BELS-S1515C

The first step is to check what system version your machine is currently running before proceeding. 

Instructions for checking which version of L software you have:

1. Press the Settings icon on the main screen.
2. Select the Information tab at the bottom of the screen.
3. Press the Version icon and the following software versions display:
       Operation app (OS):  Displays Operation Software Version
       Control app (CS):  Displays the Control Software Version:
   PR Boot:  Displays PR Version
       Linux:  Displays Linux Software Version
       Boot:  Displays the Boot ROM Software Version
       OP MCU:  Displays Operation Version for Machine Control Unit    

Instructions for Downloading and Saving the System file

1. Download the System zip file above to your computer's hard drive.
2. Unzip the system software file.
3. Copy this system file (*.LSS) directly to the USB flash drive into the root directory.

Instructions for Updating System files

1. Turn the power OFF at the Automat. 
2. Insert the USB flash drive with the new system software on it. 
3. While the machine is OFF, press and hold the ORIGIN key and then Power ON. 
4. Hold the ORIGIN key until the automat makes an intermittent beeping sound
5. The Update screen will display with available L System update files.
6. Select a .LSS System Software Version to update, if there are multiple files.
7. Press and hold the Update icon above "J" to start the system software update. 
8. The Automat will display a "Completed" message once completed.
9. Turn the power OFF and reboot the machine to finish the update.

Note: After reboot check the Version screen to make sure the Linux version updated. Contact techsupport@barudan.com if it didn't update.

Highlights of changes:

V1.04 R00

• Activated Easy Cap Frame mode

V1.03 R00

• Added continuous needle change operation by pressing and holding icons
• Added security timer setup screen.
• Change large message view default to on
• Update screen shows latest version at top
• Changed MK8 parameter #05: "M.M brake start" so it's internal fixed to MSU2: Heads parameter

V1.02 R00

• 1st Production version of software